Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A ceiling fan there
05-17-2018, 01:56 PM,
#1
Big Grin  A ceiling fan there
Therefore Im sitting in the kitchen in the middle of the afternoon getting ready to watch a baseball game, I have the range using the small hotdogs, getting ready to stay in when it happened...Im perspiration!

Thats when I chose to use a ceiling fan. A ceiling fan provides many functional benefits while putting a certain decorative touch to a space. Learn further on the internet by navigating to our striking encyclopedia. In the summertime it can benefit cool a room (or perhaps a deck). In the winter it could be used at low rates to move warmer air that has risen up to roof level.

Whatever your reason for installing a ceiling fan, you'll find it to be a relatively easy task particularly if you will be changing a light fixture in the middle-of a room (each of the wiring will already be there). Most likely your biggest obstacle would have been a new workbox that's approved for the weight of an overhead fan or adding support to an existing workbox, a workbox that is not approved for ceiling fan weight can cause disaster!

The next directions cover basic installations when changing a current light. It'll give a notion to you of what is necessary for the project. Make certain you evaluate and follow instructions that are specific for the fan you buy. Based on your installation requirements, you might need to purchase a longer down rod for cathedral ceilings or if it is maybe not involved purchase an optional lighting set. I discovered jump button by searching Yahoo.

1) Turn off the signal by switching off the breaker. Eliminate the current ceiling fixture.

2) Determine if your existing workbox will provide enough support. If you've use of the workbox from your own basement, examine to see if the workbox has metal mix braces that period between two joists. If not, it is possible to cut a 2x4 to fit between the joists. To get one more viewpoint, consider having a glance at: ceiling reset lights. Mount it so it touches the top of the workbox. Anchor the wood in position. From the room, use 1 drywall screws to anchor the box for the wood support.

3) If you don't have access from the attic, you can use a metal cross brace through the rough opening in your roof and then attach an authorized workbox for the metal brace.

4) I hate this part! Build the ceiling fan according to the manufacturers provided directions. If you are able to hang the lover, get the mounting bracket and install it to the ceiling workbox. Some fans feature a hanging body that allows one to lift the ball end of the rod in position. Others come with a segment that provides a J land that allows you to hang the motor housing while hooking up the wiring

5) In the event that you removed a light fixture in the ceiling, most likely the present wiring provides one switched enterprise to your new ceiling fan. This means the wall switch may function as master switch to turn the system off and o-n. The pull chain to the fan may also control the fan (and its speed). A pull string and the wall switch may also control it, In the event that you install an optional light kit to the lover.

6) After the wiring diagram supplied with the fan, hook-up the wires using wire nuts. Probably this is as simple as connecting the 2 black wires; connecting the 2 white wires and connecting the 2 ground wires.

7) When the fan is wired, end its construction based on the particular manufacturers instructions. You'll have to deploy the canopy to the top of the rod.

8 )You will even have to connect the fan blades. For other viewpoints, consider having a glance at: Obtaining the Right Vacuum on your Home - Hemoroizi Forum. If you're installing a light kit, remove the cover to the bottom of the fan where in fact the light kit is likely to be attached. Following manufacturers guidelines, build and install the light kit.

At this time you are ready to begin enjoying your new ceiling fan and change the breaker on..
Find all posts by this user
Quote this message in a reply


Forum Jump:


Users browsing this thread: 1 Guest(s)

Theme designed by Laugh
Contact Us | Joshuap James | Return to Top | | Lite (Archive) Mode | RSS Syndication |